Disassembling the engine to replace worn parts It is advisable to disassemble the engine on a special turntable
The steering of the car is rack and pinion, with hydraulic booster. Steering rack-and-pinion
Before inspecting the gearbox parts, thoroughly clean them, use a brush or scraper to remove all deposits and clean the holes and splines from possible contamination; then wash (kerosene, solvent,...
For Mazda 6 cars for the Russian market, transverse four-stroke gasoline engines with in-line vertical arrangement of cylinders with a volume of 1.8 liters (120 hp), 2.0 liters (147 hp) and 2.5...
We prepare the car and remove the engine, as indicated in the previous article Flushing the outside of the engine
Brake pads are replaced when the lining wear is less than 2 mm, or a squeak appears during braking, which is caused by the pad wear limit indicator
Select your language
