Adjustment of thermal gaps in the valve drive is required for engines K7J and K7M.

For the K4M engine, valve clearance adjustment is not required, this engine is equipped with hydraulic valve clearance compensators

The TDC setting is needed when replacing the timing belt and for other repairs on the engine

At every maintenance, the condition of the brakes should be checked.

We remove parts and elements of the rear suspension in case of wear or defects.

We replace the sump gasket when oil leakage is detected, when the leak is not eliminated by tightening the sump bolts.

Clutch with manual transmission - dry, single plate, diaphragm.