We remove the cylinder head to replace the gasket between the head and the cylinder block, as well as for repair

Mechanical three-shaft gearboxes of three types are installed on UAZ vehicles:

• - four-speed, with synchronizers only in III and IV gears;

The driveline consists of front and rear shafts that transmit torque from the transfer case to the drive axles.

Each cardan shaft has needle bearing universal joints at the ends

The car can be equipped with a starter 42.3708 or 4211.3708-01 or 62.3708

Starters have almost the same design

In the article, we will consider replacing the steering rods and lubricating the steering rod joints, as well as adjusting the toe of the front wheels

The power supply system consists of two fuel tanks, fuel lines, a switching valve, a fuel pump, a sediment filter, a fine fuel filter, a carburetor with a throttle and air damper drive, an air filter