We remove the instrument cluster for replacement, as well as when removing the instrument panel.
A Torx T-20 wrench is required to remove the instrument cluster
Disconnect the negative battery terminal
Remove the upper casing of the steering column
We unscrew the screw securing the instrument panel visor on the left side (the steering wheel is removed for clarity)
Unscrew the screw securing the instrument panel visor on the right side
Remove by pulling up and towards the visor, unfastening it from the latches
We unscrew the two bolts of the instrument cluster on the left side
We unscrew the two bolts of the instrument cluster on the right side
We take out the instrument cluster by the length of the wires of the connected pads
Disconnect the wiring harness on the left side of the instrument cluster
Disconnect the wiring harness on the right side and remove the instrument cluster
Install the instrument panel and all parts in the reverse order.