We remove the front door of the car for repair, as well as for replacement
If we remove the door for straightening or painting, it is advisable to remove its internal elements before removing the door
Because it is convenient to disassemble the door while it is hung on the car body
The process of disassembling the door is described in previous articles
Let's see how to remove the door stop
Removing and installing the front door opening limiter
Raise the glass to the top position and remove the door upholstery and remove the door mounting panel
Unscrew the bolt securing the limiter to the A-pillar
We unscrew the two nuts securing the limiter to the front end of the door
Remove the limiter through the hole in the inner and technological panel of the door
Install the limiter in reverse order
Removing and installing the front door
Unscrew the bolt securing the limiter opening the front door to the pillar
Turn the latch and disconnect the front door wiring block from the common wiring harness block
The front door wiring harness block is connected to the common wiring harness block on the A-pillar in this way
Holding the door (it is desirable that the assistant holds the door), unscrew the bolts securing the upper hinge of the door
Unscrew the bolts of the lower door hinge
We lower the door onto a stand installed at the level of the threshold of the body, and remove the door
Install the front door in reverse order