Only the instrument cluster glass needs to be replaced.
If other parts are faulty, the entire instrument cluster needs to be replaced.
Disconnect the battery cables, starting with the negative terminal.
Grab the instrument cluster visor with both hands, lift it, and slide it in the direction of the arrows.
The visor is secured to the instrument cluster with spring clips.
Using a screwdriver with a Torx 20 bit, unscrew the instrument cluster mounting screw.
By simultaneously pressing On both sides, use the plastic clips...
...lift the instrument cluster
Disconnect the instrument cluster power connector.
Installation
Installation is the reverse of removal.
Connect the battery without programming.
Perform the necessary configuration.
Disconnect the battery.
This operation automatically registers the instrument cluster configurations.
Connect the battery and perform the necessary programming.
Tighten the battery cover bolts to the specified torque of 4 Nm.