The fog lamps can be replaced after first removing the bumper.
However, they can also be replaced without removing the bumper.
Remove the front wheel on the side of the lamp to be replaced.
Fig. 1. Remove the front section of the wheel arch liner
Fig. 2. Extract the fog lamp wiring harness connector
Fig. 3. Unscrew the two fixing screws securing the fog lamp to the bumper
Fig. 4. Extract the fog lamp
Fog lamp installation
When replacing, use only a certified H11 bulb.
Tighten the fog lamp fixing screws.
Fig. 5. Fog lamp adjustment
Connect the wiring harness plug.
Using a screwdriver, adjust the fog lamps (Fig. 5).
