We remove the lining of the floor tunnel when removing the instrument panel and for some types of work related to the removal of the lining of the floor tunnel.
To work, you need tools: socket head 10, Torx T-20 key, screwdrivers.
Disconnect the negative battery terminal
Using a screwdriver, open the plug from the lining of the floor tunnel
We unscrew the screw securing the rear of the cladding to the body
Move back the back of the cladding, removing the engagement latches
Remove the back of the cladding
Unscrew the nut that secures the front of the cladding to the base of the body
Unfasten the clasp of the upper fastening of the lever cover
Remove the lower cover holder from the hole in the lining of the floor tunnel
Remove the cover of the gear lever
Remove the ashtray from the lining socket
We unscrew the two screws securing the front of the cladding
Raise the front part of the lining and disconnect the wiring harness block from the cigarette lighter
Remove the front part of the floor tunnel lining
Install the cladding in reverse order.