We remove the headlights of the car for replacement or to gain access to other parts of the car
Replacing headlight
We prepare the car and disconnect the negative battery terminal
Remove the front bumper
Press the retainer of the side light lamp wire block when turning (AFS) and disconnect the block from the lamp
We press the lock of the block of wires of the ignition block of the dipped / high beam lamp and disconnect the block from the block
In the same way, disconnect the wire block from the headlight electric corrector
We take out the turn indicator lamp socket and the side light lamp socket from the corresponding seats of the headlight and set them aside
We unscrew the latch of the headlamp upper fastening to the bracket of the radiator frame and remove the latch from the hole
We unscrew the bolt of the upper fastening of the headlight to the wing bracket
We unscrew the bolt of the lower fastening of the headlight to the bracket of the radiator frame
Using a screwdriver to pry the retainer of the lower headlight mounting to the radiator frame bracket
Remove the latch from the hole
Location of clamps and bolts: A - bottom fastening to the radiator frame; B - top attachment to the wing
We unscrew the bolt of the side fastening of the headlight to the front fender bracket
Remove the headlight block
Install the headlight unit and all parts in reverse order
Replacing the fog lamp
Disconnect the negative battery terminal
Remove the front wheel liner from the side of the fog lamp to be removed
Press the lock of the wire block and disconnect the block from the lamp base
We unscrew the screw securing (adjusting) the fog lamp to the front bumper bracket
And unscrew the side screw of the fog lamp
Remove the fog lamp
When replacing a headlight, pay attention to the marking
Install the fog lamp and all parts in reverse order
If necessary, adjust the headlights as described in previous articles
