We remove the wheel hub for replacement and when removing the rear suspension knuckle

We prepare the car and install it on a lift or use a jack and reliable stops

Disconnect the negative wire from the battery

Loosen the tightening of the wheel mounting nuts

We lock the front wheels (if the car is not on the lift), lift and install the rear part of the car on the stops

Removing the wheel from the side of the work being done

Removing and installing the rear wheel hub Mazda 6

Removing the brake disc

Removing and installing the rear wheel hub Mazda 6Removing and installing the rear wheel hub Mazda 6

Unscrew the mounting bolt of the wheel speed sensor, and pull the sensor together with the wire to the side

Removing and installing the rear wheel hub Mazda 6Removing and installing the rear wheel hub Mazda 6

Unscrew the four hub mounting bolts

The arrows show the hub mounting bolts

Removing and installing the rear wheel hub Mazda 6Removing and installing the rear wheel hub Mazda 6

We remove the hub, holding the brake shield

Installing the rear wheel hub in reverse order

Removing and installing the rear wheel hub Mazda 6

To replace the rear wheel hub studs, carefully knock the stud out of the hub and press a new stud into its place

Installing the parts in reverse order