We remove the floor tunnel trim when removing the instrument panel and the parking brake lever.
Use a flat-head screwdriver to open the plug on the back of the floor tunnel trim.
Use a T-20 Torx wrench to loosen the screw securing the rear trim.
Slide the rear section of the floor tunnel trim back, disengaging the clips connecting it to the front section.
Disconnect the wiring harness from the window switches
Disconnect the wiring harness from the electric outside mirrors and the rear window lock switch and remove the rear section of the floor tunnel trim
Remove the frame with the gearshift boot from the hole in the front part of the trim.
Using a 10mm socket, unscrew the nut securing the front part of the floor tunnel trim.
Using a T-20 Torx wrench, unscrew the screw securing the front portion of the floor tunnel trim, located next to the AUX and USB ports.
Using a T-20 Torx wrench, unscrew the two screws securing the front portion of the floor tunnel trim in the ashtray and cup holder recess.
Using a T-20 Torx wrench, unscrew the screws securing the front floor tunnel trim on the right and left sides.
Remove the trim from the gearshift lever by pushing the gearshift boot into the hole in the trim.
Press the latch to disconnect the wiring harness from the cigarette lighter.
Press the latch to disconnect the wiring harness from the AUX and USB ports and remove the front part of the floor tunnel trim.
Install both parts of the floor tunnel trim in the reverse order. okay.