The vehicle is equipped with a dual-acting electric pump that supplies fluid from one reservoir to either the windshield or rear window washer, depending on the power supply to two connector pins.
The windshield and rear window washers are activated directly by the wiper switch.
Two options are possible: A and B.
Option "A"
The line is powered from port 3, the windshield washer is active.
- Pin 1 - Ground;
- Pin 2 - +12 volts.
Option "B"
The line is powered from port 4, the rear window washer is active.
Fig. Windshield washer pump: 1, 2 - contacts, 3, 4 - hoses
- Contact 2 - Ground;
- Contact 1 - +12 volts
Windshield washer pump
Car without headlight washers
The pump is located in front of the windshield washer reservoir (Fig. 2).
Fig. Windshield Washer Pump (Cars without Headlight Washers)
To access the windshield washer pump, you must remove the front bumper.
Mark both lines.
Disconnect the lines.
Remove the pump.
Cars with Headlight Washers
The pump is located behind the windshield washer reservoir (Fig. 3).
Fig. Windshield Washer Pump (vehicle with headlight washer)
To access the windshield washer pump, remove the right front mudguard.
Mark both lines.
Disconnect the lines.
Remove the pump.