We remove the seats for repair, as well as for approaching the details and components of the car inside the cabin
Removing the front seat
We show on the example of the left seat, the right passenger seat is removed in the same way
Disconnect the negative battery terminal, because you will have to disconnect the wiring harness from the seatbelt indicator
We press the fastening latches and disconnect the wiring harness from the seat bracket
Disconnect the driver's seat belt signaling pads
Disconnecting the driver's seat heater wires
We unscrew the two bolts of the front fastening of the support brackets of the seat rails to the base of the body
Move the seat forward as far as it will go
We unscrew the two bolts of the rear fastening of the support brackets of the seat rails to the base of the body
Remove the seat from the car
Unscrew the bolt securing the seat belt buckle to the seat (if necessary)
Remove the lock
Remove the washer
Install the front seat and all removed parts in reverse order
Remove the rear seat
Rear seat, in addition, we also remove it to approach the fuel module hatch
You will need a key for 10, pliers, screwdrivers
Raise the front rear seat cushion
And lifting from behind - remove the pillow
Remove the rear side seat belts from the eyelets on the back of the rear seat
Remove the rear center seat belt mounting bolt
We unscrew the three bolts securing the seat back to the base of the body
We remove the three eyes of the seat back from engagement with the hooks on the body, lifting the back up (in the direction of the arrow in the photo)
Remove the backrest from the passenger compartment
We unscrew two bolts securing the amplifiers located behind the back of the rear seat
Removing amplifiers
Pry off the fastener of the panel separating the passenger compartment from the trunk
Remove the retainer
In the photo, the location of the latches for fastening the protective panel separating the passenger compartment from the luggage compartment
We unscrew two screws on each side of the panel mount
And remove the panel
Install the rear seat in reverse order.