Preparing the car for work. Disconnect the negative battery terminal.
Tools required: slotted and Phillips screwdrivers, socket 19.
Set the steering wheel in a straight position.
Remove the steering wheel
We unscrew the two screws in the recess of the lower part of the casing
Pull up and remove the upper part of the casing
We unscrew the two screws securing the lower part of the casing to the steering column
Remove the lower part of the casing
Remove the lower trim of the instrument panel
We unscrew two screws securing the left and right steering column switches
Remove the screws from the holes
Squeeze the latch and disconnect the white block of the wires of the left switch
Remove the switch
Squeeze the latch and disconnect the black block of the wires of the right switch
Remove the switch
Set the switches in reverse order.