We remove the fender liner to approach the components and parts that are behind the fender liner, as well as to clean and process the body
We install the car on a lift or a viewing ditch
Remove the mudguard of the engine compartment (removing the guards)
From the bottom of the car with a 10 head with an extension, unscrew the three bolts securing the fender liner to the front bumper
Use a flat screwdriver to pry the piston retainer and remove the piston securing the fender liner to the body
We also remove the three pistons securing the fender liner to the front fender
Using a Phillips screwdriver, unscrew the two screws securing the fender liner to the front fender in the rear
We unscrew the plastic nut securing the fender liner to the mudguard in its middle part
We also unscrew the two plastic nuts securing the fender liner to the mudguard in its rear part
Remove the fender liner.
Install the fender liner in reverse order.
