Transmission
This section discusses vehicle transmission components: gearboxes, reduction gears.
Features, disassembly, and assembly of transmission components.
Disassembly of the transfer case was discussed in the article Disassembly of the transfer case
Before inspection, thoroughly clean all parts of the transfer case with a brush and scraper, and then wash. Blow off the parts with a jet of compressed air.
Before inspecting the gearbox parts, thoroughly clean them, use a brush or scraper to remove all deposits and clean the holes and splines from possible contamination; then wash (kerosene, solvent, etc.) to remove and dissolve all oil residues.
Before inspecting the gearbox parts, wash them thoroughly.
This will make it easier to detect wear and damage to the parts.
We disassemble the gear selection mechanism when the mechanism parts wear out
Remove the transfer case and clean it of dirt
Drain the oil from the transfer case.
