Remove the front door upholstery to access the internal parts of the door
We prepare the car and disconnect the negative battery terminal
Remove the corner trim from the door panel, overcoming the force of the latches
We squeeze the latch, disconnect the wire block from the speaker of the speaker system and remove the corner cover
Use a screwdriver to pry off and remove the decorative lining of the lining of the inner handle of the lock
Unscrew the screw securing the lining of the inner handle
Remove the decorative insert from the armrest niche
And unscrew the screw securing the armrest
Use a screwdriver to pry off the edge of the control panel for the door windows and exterior mirrors
We remove the block from the armrest socket, overcoming the resistance of the latches
Press on the latches of the block of wires for controlling the electric windows of the doors
And detach the block from the block
We also disconnect the external mirror control wire block and remove the control unit
We separate the upholstery from the inner panel of the door, overcoming the resistance of the clamps
Turn the inner handle and insert it into the opening of the front door upholstery
From the reverse side of the upholstery, pull the interior lamp socket and remove the socket together with the lamp from the interior lighting dome.
Remove the cartridge together with the lamp to the side, after which we remove the upholstery of the front door
If necessary, remove the interior lighting lamp from the cartridge and replace it
Install the upholstery of the front door and all the details in reverse order