Remove the anti-roll bar to replace the stabilizer parts
We install the car on a lift or a viewing ditch
If we install the car on an inspection ditch, then block the front wheels and raise the rear of the car
We unscrew the nut that secures the stabilizer link to the rear lower arm, keeping the finger from turning with a hexagon 5
Unscrew the nut securing the rack to the anti-roll bar
Remove the stabilizer bar
We unscrew two bolts securing the stabilizer brackets to the cross member
Remove the stabilizer bar assembly with cushions and mounting brackets
Remove the stabilizer bar bracket
Open the rubber cushion and remove it from the stabilizer bar
We install new pillows and press on the stabilizer brackets
Install the stabilizer parts in reverse order
