Nissan Almera

Remove the rail and injectors to check and replace the injectors

If during the next maintenance or when replacing a wheel it was found that the wear of the pads exceeded the norm, then you need to change the pads

In the article, we will consider the replacement of elements of the exhaust system

If the engine overheats during operation or slowly warms up to operating temperature, check the thermostat

Repair of the car's parking brake consists in replacing the handbrake control cables, as well as adjusting the handbrake

We replace rear suspension parts in case of malfunctions caused by wear, aging or deformation.

A vehicle exhaust muffler system consists of a main muffler, an additional muffler, an exhaust gas catalytic converter, an exhaust manifold and connecting pipes

We replace the supports in case of their defects or during the repair of the power plant

We replace the working fluid in the hydraulic drive of the brake system in accordance with the maintenance schedule - every 30 thousand kilometers or after two years (whichever comes first).

Remove the fuel tank for replacement or for flushing

Cooling system - liquid, closed type, forced circulation

We remove the steering wheel to replace it, as well as when removing the steering column switches, steering column or instrument panel

Usually, the fan is removed to replace the electric motor, impeller or when removing the radiator

We change the anthers of the drive hinges in case of damage or when replacing the hinge.

One of the reasons for the absence or incomplete charging of the battery is a partial or complete failure of the generator.

In this case, you have to remove the generator and check and repair.