If the engine overheats during operation or slowly warms up to operating temperature, check the thermostat

If during the next maintenance or when replacing a wheel it was found that the wear of the pads exceeded the norm, then you need to change the pads

We remove the facings when dismantling the instrument panel, removing the parking brake lever

The wheel (working) cylinder of the rear wheel brake mechanism is replaced when the braking efficiency of the wheel decreases due to jamming of the pistons in the cylinder or leakage of brake fluid through the cylinder seals

A condenser (air conditioning radiator) of a multi-flow type is installed in front of the radiator of the engine cooling system

We replace brake hoses if they have mechanical defects - scuffs, cracks or breaks, as well as if brake fluid leaks through the hose