We remove the instrument cluster from the car for replacement, as well as when removing the instrument panel.
We prepare the car and remove the negative battery terminal.
Remove the upper casing of the steering column
Use a flat screwdriver to pry off the decorative trim of the instrument panel
Remove the decorative overlay
We pry off the decorative trim on the right side of the steering column
Remove the right trim
Using a Torx T20 wrench, unscrew the screw securing the combination lining on the right side.
Also unscrew the screw on the left side.
Use a screwdriver to pry off the visor of the instrument cluster
And remove the visor
Pry off the edge of the instrument cluster cover with a flat screwdriver
We disengage the lining retainer on the right side.
We also disengage the latch on the left side.
Remove the instrument cluster trim
Using the Torx T20 wrench, unscrew the four screws securing the instrument cluster
Displaying the instrument cluster from the instrument panel
Press the latch and disconnect the gray block from the combination
In the same way, disconnect the black wire block and remove the instrument cluster.
Install the instrument cluster in reverse order.