Removal and installation of automatic transmission Renault Duster
We remove the automatic transmission for repair, as well as for replacement. Main defects that require automatic transmission removal:
How to replace the camshaft seal of the Renault Sandero engine
We replace the camshaft oil seal if there are signs of oil leakage.
How to check and replace the Hyundai Solaris vacuum booster
If the force on the brake pedal during braking has increased compared to normal, you need to check the operation of the vacuum booster
Replacing the oil seal of the drive gear of the gearbox GAZelle Next
We replace the cuff if there is an oil leak from under the drive gear flange
Replacement of the Mazda 6 engine detonation sensor
A knock sensor attached to the top of the cylinder block in the area between cylinders 2 and 3 detects abnormal vibrations (knock) in the engine
Repair of ShPG engine VAZ-2123
The main dimensions of the connecting rod and piston group are shown in Figure 1. The piston is cast aluminum. The mass of the pistons is strictly maintained in the manufacture.
Features of engines KAMAZ-740.50-360, KAMAZ-740.51-320
KAMA3-740.50-360, KAMA3-740.51-320 engines, designed for installation on single vehicles and truck tractors used as part of road trains, supplied to the domestic market and to countries with...
How to remove and install the rear doors of a Mazda 6 car
We remove the rear doors of the car for replacement, as well as for repair Removing the tailgate opening limiter
Replacing the accessory belt Nissan Almera
We replace the belt after 60 thousand kilometers of the car or four years of the calendar life.
Design features of the VAZ-2107 checkpoint
The gearbox is mechanical, with manual shifting, it has five forward gears and one reverse gear, all forward gears are synchronized.
Replacement of Renault Duster coolant Pump
We replace the pump in case of noise from its bearing or in case of tight rotation of the pump pulley, large radial play of the pump shaft
Design features of the front suspension Nissan Almera
The front suspension is independent, MacPherson type, with triangular wishbones and anti-roll bar.
Renault Sandero rear wheel brake repair
In the article, we will consider the removal of the brake drum, the replacement of the pads and the replacement of the brake slave cylinder.
Removing elements of the Cummins ISF3.8 air intake system
We remove the air intake elements during a major overhaul or in case of malfunctions.
How to replace the coolant pump and thermostat Mazda 6
We remove the coolant pump and thermostat when repairing the engine and for replacement
Replacing car lighting bulbs Renault Sandero
On cars, block headlights are used that combine a two-filament low and high beam lamp, a side light lamp and a direction indicator lamp
Removal and installation of an adsorber of the Renault Duster car
The fuel vapor recovery system prevents fuel vapors from escaping into the atmosphere, which adversely affect the environment
Removal and installation of the Gazelle Next vacuum pump
The vacuum required for the brake booster to operate is created by a vacuum pump driven by the front end of the engine camshaft.