The lock and its drive are removed for replacement.

Opening the tailgate

Снятие замка двери багажника Рено ДастерСнятие замка двери багажника Рено Дастер

Using a Torx T20 wrench, unscrew the two screws securing the door upholstery

We pry off the edge of the upholstery with a slotted screwdriver

Снятие замка двери багажника Рено ДастерСнятие замка двери багажника Рено Дастер

We separate it from the inner panel of the door, overcoming the resistance of eight pistons and remove it.

To remove the cylinder mechanism (cell), we press the yellow plastic lock of the cylinder mechanism of the lock on the intermediate lever, turn it around the axis and remove the end of the rod from the hole of the intermediate lever.

Снятие замка двери багажника Рено ДастерСнятие замка двери багажника Рено Дастер

Using a 10 head with an extension, unscrew the three nuts securing the flange of the lock cylinder housing

We remove it from the door studs along with the electric lock lock

Снятие замка двери багажника Рено ДастерСнятие замка двери багажника Рено Дастер

Having pressed the lock of the wiring harness block, disconnect it from the electric drive

Removing the cylinder mechanism of the electric lock

Снятие замка двери багажника Рено ДастерСнятие замка двери багажника Рено Дастер

Using the Torx T20 key, we unscrew the screw securing the electric drive to the body of the cylinder mechanism of the door lock

We remove the thrust 1 of the electric drive from the lever 2 of the cylinder mechanism of the lock.

Снятие замка двери багажника Рено ДастерСнятие замка двери багажника Рено Дастер

To remove the tailgate lock, depress the white plastic retainer of the lock rod on the intermediate lever, turn it around the axis and remove the end of the rod from the hole in the intermediate lever.

Using a Torx T30 key, unscrew the two screws securing the lock

Снятие замка двери багажника Рено ДастерСнятие замка двери багажника Рено Дастер

We bring it out together with the rod from the hole in the inner door panel

By pressing the latch, disconnect the block of wires from the limit switch of the lock and remove the lock together with the rod.

Снятие замка двери багажника Рено ДастерСнятие замка двери багажника Рено Дастер

To remove the intermediate lever of the lock drive, disconnect both rods from it

Using the Torx T50 key, unscrew the screw securing the intermediate lever of the lock drive and remove the lever.

Снятие замка двери багажника Рено ДастерСнятие замка двери багажника Рено Дастер

The length of the rod connecting the intermediate lever with the cylinder mechanism of the lock can be changed due to the turns knurled on it.

After installing the lock and parts of its drive, the rod of the cylinder mechanism is latched in the required position with a metal lock, while the lock and the cylinder mechanism of the lock must be in a free position.

If the tailgate cannot be opened from outside the vehicle, it can be opened from inside the tailgate.

Снятие замка двери багажника Рено Дастер

To do this, press the lock lever and open the tailgate.