UAZ car

These two-axle, all-terrain vehicles, with front and rear drive axles (4x4 wheel arrangement), are designed to transport people and cargo on all types of roads and off-road. Vehicles equipped with a towing hitch and shock-absorbing device can tow a single-axle trailer with a gross weight of up to 850 kg. Vehicles with a rigid towing device may only be used as a towing vehicle for short periods.

Preparing the car for the task

We unscrew the nuts securing the main brake cylinder to the vacuum booster and move the cylinder forward, trying not to bend the brake pipes too much

  1. Replacement of elements of the exhaust gas system UAZ-3151, -31512, -31514, -31519
  2. Replacement of oil seals of the front axle of the car UAZ-3151, -31512, -31514, -31519
  3. How to remove and check the control devices of the car UAZ-3151, -31512, -31514, -31519

Articles

The hinges of equal angular velocities are replaced in case of defects described in the previous article It does not make sense to replace individual parts of the hinges, in extreme cases, only the...

The fuse box for the power circuits for the powertrain and front lighting is usually installed in the engine compartment.

In the article, we will look at how to bleed the refrigerant from the system, replace the tube seal rings and parts, and replace the cabin air filter element

Removal Disconnect the battery cables, starting with the negative terminal. Remove the intake manifold.

A worn/poorly installed belt and tensioner or a misaligned pulley can cause the belt to come off

We remove the receiver and intake manifold to perform work on the removal and repair of the cylinder head, as well as during the overhaul of the engine.