UAZ car

These two-axle, all-terrain vehicles, with front and rear drive axles (4x4 wheel arrangement), are designed to transport people and cargo on all types of roads and off-road. Vehicles equipped with a towing hitch and shock-absorbing device can tow a single-axle trailer with a gross weight of up to 850 kg. Vehicles with a rigid towing device may only be used as a towing vehicle for short periods.

The car can be equipped with a starter 42.3708 or 4211.3708-01 or 62.3708

Starters have almost the same design

  1. UAZ-3151, -31512, -31514, -31519 front suspension design
  2. Removal of fuel system elements UAZ-3151, -31512, -31514, -31519
  3. How to replace the steering column switches of a UAZ-3151, -31512, -31514, -31519 car

Articles

Piston pins are installed with an interference fit in the upper heads of the connecting rods and rotate freely in the piston bosses, so heat the upper head of the connecting rod to a temperature of...

Cuffs of the front axle elements are replaced when worn and during repairs

The rear suspension is spring-loaded, semi-independent, with a transverse beam and hydraulic shock absorbers

The hydraulic unit, or hydraulic distributor, receives signals from the electronic control unit, switches channels in the control valve block and controls the clutch engagement pressure.

We remove the subframe to dismantle the gearbox and other components of the power unit and front suspension.

The piston of cylinder 1 is set to the TDC (top dead center) position of the compression stroke to ensure that the valve timing is not disturbed when removing the camshaft drive belt.