UAZ car

These two-axle, all-terrain vehicles, with front and rear drive axles (4x4 wheel arrangement), are designed to transport people and cargo on all types of roads and off-road. Vehicles equipped with a towing hitch and shock-absorbing device can tow a single-axle trailer with a gross weight of up to 850 kg. Vehicles with a rigid towing device may only be used as a towing vehicle for short periods.

The car can be equipped with one of three types of generator:

G250P2 - with a brush assembly, a built-in rectifier and an external voltage regulator

  1. How to disassemble the carburetor K-151 UAZ-3151, -31512, -31514, -31519
  2. How to remove and deliver the transfer case of the car UAZ-3151, -31512, -31514, -31519
  3. UAZ-3151, -31512, -31514, -31519 carburetor design Feature

Articles

The flywheel is removed to replace the rear crankshaft oil seal, to replace it if the toothed rim used to start the engine with the starter is damaged, and to grind the surface under the clutch disc.

We remove the cylinder head cover for repair and adjustment work, as well as when replacing seals.

The timing chain tensioner is located on the right side of the engine above the coolant pump. Oil is supplied to the hydraulic tensioner through a seamless steel tube with a diameter of 6 mm with...

This article covers the replacement of engine management sensors.

Disassembly of the cylinder block was discussed in the article - " Disassembly of the cylinder block " After disassembling the cylinder block, it is necessary to determine the possibility of further...

The cooling system is used to maintain the operating temperature of the engine