Renault Logan repair
The Renault Logan is an affordable family car, so to keep its price down, components and assemblies from other Renault models were extensively used. The car's MacPherson strut front suspension with lower wishbones is based on that of the Renault Clio II, while the rear features a semi-independent H-shaped crossbeam with trailing arms, similar to the Renault Modus. The entire heating system is also borrowed from the new Modus. The electronic control unit is borrowed from the Twingo, and the car received the cooling system vents and gearshift knob from the Espace.
If you detect engine oil or coolant leaks at the joints between the cylinder head and the block, remove the head and replace the gasket.
The stabilizer bar is secured to the front subframe via rubber mounts.
We replace the front suspension arm if the silent blocks or ball joint are worn, or if the arm itself is deformed.
You will need: 13mm, 17mm, 18mm, 21mm wrenches, a 6mm Allen key, and a wheel lug wrench.
Apply the parking brake and chock the rear wheels.
Front wheel drive assemblies are removed for replacement if damaged or to replace the joints and their boots.
Furthermore, front wheel drive assemblies may need to be removed to gain access to other components.
