Renault Sandero

This section describes the design, maintenance, and repair of the Sandero. The car is equipped with a K4M, K7J, and K7M gasoline engine. Removal, installation, disassembly, and assembly of various vehicle components and mechanisms are covered.

Wheel drives with constant velocity joints (CV joints) are used to transmit torque from the main gear to the drive wheels at different wheel angles and suspension travels.

  1. Design feature of the Renault Sandero front suspension
  2. Features of the brakes of the car Renault Sandero
  3. Replacing the cylinder head cover gasket Renault Sandero

Articles

Remove the fuel module for replacement or repair Tools will be required: screwdrivers, a container for draining fuel from the fuel pump module, a 14 wrench

We remove the clutch discs for replacement, as well as when repairing engine components We prepare the car and install it on a lift or a viewing ditch

The TDC setting is needed when replacing the timing belt and for other repairs on the engine

The working fluid in the power steering system is not changed during operation. But if the liquid has become very dark, then you need to replace the liquid and check the operation of the power...

We remove the air intake and the noise silencer for replacement, as well as for access to vehicle parts and assemblies.

To compensate for thermal expansion, a gap is established between the end of the valve stem and the camshaft cam