GAZELLE NEXT

Checking and installing TDC of the first cylinder of the engine in the compression stroke is needed when carrying out work to remove the camshaft drive chain

Preparing the car for the task.

Disconnect the negative battery terminal

We remove the gearbox as described in the article - Removing and installing the gearbox gear GAZelle Next

It is recommended to change the brake fluid with an assistant, having previously installed the car on a viewing ditch or overpass

We remove the flywheel when overhauling the engine or when repairing the flywheel itself

We remove the suspension assembly for replacement or overhaul

To complete the task, you will need tools: wrenches for 13.16, 19, 22, 24, a head for 17, a jack, a ball joint remover, a spring compressor.

We replace the cuff if there is an oil leak from under the drive gear flange

The reasons for a malfunction of the main brake cylinder are wear or loss of elasticity of the cuffs, wear of the working surfaces of the cylinder and pistons, swelling of the cuffs (due to the ingress of mineral oils into the system), clogging of the compensation hole.

When replacing the high/low beam lamp, do not touch the lamp bulb with your fingers, because due to the high temperature of the bulb, any surface contaminants (for example, fingerprints) burn out during operation, leaving blackening