In this article, we will look at how to remove the wiper elements and replace them
We mark with a marker on the windshield the location of the right and left brushes in the initial position of the wiper, so that when reassembling the brushes, they work in the desired area of the glass
Using a screwdriver, pry off the edge of the decorative trim of the wiper arm nut
And remove the overlay
Unscrew the lever mounting nut and remove the wiper trapezoid from the axle
Remove the second lever in the same way
Disconnect the negative battery terminal
Remove the air intake grille on the left side
Remove the protective cover of the wiper trapezoid
Press the lock of the wire block and disconnect the block from the wiper gearmotor
We unscrew the two bolts securing the wiper trapezoid to the body
The arrows show the bolts of the windshield wiper trapezoid to the body
We take out the wiper trapezoid with a gearmotor
To remove the gearmotor, unscrew the crank nut
We unscrew the two bolts securing the gearmotor bracket to the trapezoid support
And disconnect the gearmotor from supports
Install the gearmotor and trapezoid in reverse order
