We replace the chain when it is stretched and remove it when repairing the engine.

To replace the chain, you need to remove the engine from the GAZelle NEXT car

  1. Assembly of the engine block G4KD and G4KE Kia Magentis
  2. Replacing the accessory belt Nissan Almera
  3. Checking and replacing the timing belt of the Renault Sandero car
  4. Renault Duster engine cooling system design
  5. Renault Duster accessory belt check and replacement

We replace the shock absorber in case of a strong fluid leak from the shock absorber or loss of efficiency. We replace the stabilizer as a result of strong deformation.

The system consists of an electronic control unit, a microswitch, a forced idle economizer valve, a solenoid valve, connecting hoses and wires (Fig. 1)

We replace the pump in case of noise from its bearing or in case of tight rotation of the pump pulley, large radial play of the pump shaft

Installing pistons with connecting rods Lubricate the tops of the cylinders and the crankpins with engine oil.

The high pressure fuel pump (TNVd) is driven by gears from the rear end of the crankshaft. The pump housing also has a mechanical booster pump that draws fuel from the tank.

We remove the muffler and converter during burnout or during dismantling, any nodes at which it is necessary to remove these parts.

The closed-type cooling system includes a water pump, a cross-flow radiator, a radiator fan with an electric cord, a thermostat, a heater core, hoses and sensors

We examined the engine disassembly in the article - " Engine disassembly ". There we looked at how to remove the crankshaft. Let's consider how to disassemble the crankshaft itself and inspect it.

The coolant level should be checked every time the engine is inspected