The K4M engine is gasoline, four-stroke, four-cylinder, in-line, sixteen-valve, with two overhead camshafts.

The order of operation of the cylinders: 1-3-4-2, counting - from the flywheel.

  1. Cummins ISF2.8 Timing Chain Replacement
  2. Assembly of the engine block G4KD and G4KE Kia Magentis
  3. Replacing the accessory belt Nissan Almera
  4. Checking and replacing the timing belt of the Renault Sandero car
  5. Renault Duster engine cooling system design
  6. Renault Duster accessory belt check and replacement
  7. Checking and replacing the timing belt of the Renault Duster car

We replace the camshaft oil seal if there are signs of oil leakage.

VAZ-2112 engine Petrol, four-stroke, four-cylinder, in-line, transverse, sixteen-valve, with two camshafts.

We replace the coolant pump if there is a coolant leak or if there is increased noise during operation

One of the reasons for the absence or incomplete charging of the battery is a partial or complete failure of the generator. In this case, you have to remove the generator and check and repair.

The throttle assembly with an electric drive of the multiport fuel injection system is mounted on the receiver.

The electronic control unit (ECU) for the electric power steering (EPS) system is installed in the engine compartment under the brake master cylinder.

The car is equipped with a dry, single-disc, permanently engaged clutch with a hydraulically actuated release mechanism

Remove the fuel rail and injectors for inspection and replacement.

In the article, we will consider the disassembly and assembly of the generator, as well as the replacement of generator parts We remove the generator from the car, as described in the previous article