The hydraulic block or hydraulic distributor, receiving signals from the electronic control unit, switches channels in the control valve block and controls the clutch engagement pressure

  1. Possible malfunctions Renault Duster
  2. Assembling the H4M engine
  3. Running and stopping the engine of the car Renault Arkana
  4. Disassembly of the cylinder block of the K4M engine
  5. Design features of the ZMZ-402 engine

We replace the working fluid in the hydraulic drive of the brake system in accordance with the maintenance schedule - every 30 thousand kilometers or after two years (whichever comes first).

In the rear gearbox of the car there is a final drive with a differential and an electromagnetic clutch

Removing the steering wheel Remove the steering wheel when removing the steering column switches, ignition switch, instrument panel and when removing the steering column.

Clutch with manual transmission - dry, single plate, diaphragm

Cummins ISF2.8 diesel engine, four-stroke, four-cylinder, in-line sixteen-valve, liquid-cooled, turbocharged

All-wheel drive vehicles are equipped with five- or six-speed manual transmissions.

Engage the car in first gear (move the automatic transmission selector to the "P" position) and chock the front wheels. Prepare the car for work.

We replace rear suspension parts in case of malfunctions caused by wear, aging or deformation.

If the force on the brake pedal during braking has increased compared to normal, you need to check the operation of the vacuum booster