Remove the door trim for access to the inner details of the door
We prepare the car and disconnect the negative terminal of the battery
Pry on with a screwdriver and remove the decorative trim for the lining of the inner handle of the lock
Unscrew the screw that secures the inner handle
Use a screwdriver to pry on and remove the decorative cover of the armrest handle
Unscrew the two screws securing the armrest
Arrows show the location of the armrest mounting screws
We pry on with a screwdriver and take out the rear door window regulator control unit from the armrest socket
We press on the latch of the block of wires for controlling the power window of the rear door and disconnect the block and remove the block
We separate the upholstery from the inner panel of the door, overcoming the force of the latches
We turn the inner handle, push it into the technological hole of the rear door upholstery and remove the lining
Install the cladding and all the details in reverse order