car Mazda 6
On cars, block headlights are used that combine low and high beam headlights (with halogen and gas-discharge xenon lamps) and direction indicators
Manual transmission vehicles are equipped with a single plate diaphragm clutch
Pressure plate in a stamped steel casing, attached with six bolts to the engine flywheel
Mazda 6 car body type four-door sedan, five-door hatchback and five-door station wagon, load-bearing structure, all-metal
Gasoline engines installed on Mazda 6 vehicles are equipped with an electronic engine management system with multipoint fuel injection
To compensate for the thermal expansion of the valve, a gap is set between the end of the valve stem and the camshaft cam
We change the oil in the automatic gearbox after repairing the gearbox.
Structurally, the automatic transmission does not provide for oil changes during the entire period of operation
In the article, we will look at how to check the fuel pressure and relieve the fuel pressure in the engine power supply system
Before disassembling the starter, you need to check its serviceability with simple checks
During operation, the auxiliary drive belt does not require tension adjustment during the entire service life, since the design uses an automatic belt tensioner
Compression (pressure at the end of the compression stroke) in the cylinders is the most important indicator of the condition of the engine without disassembling it
During operation, tar deposits from crankcase gases accumulate in the crankcase ventilation system