car Mazda 6
Remove handles and door locks for repair or replacement
We prepare the car, open the door, raise the glass to the upper position, remove the door upholstery and the inner handle of the rear door lock
Remove the anti-roll bar to replace the stabilizer parts
We install the car on a lift or a viewing ditch
We remove the cables and the gear selector for replacement and repair
We remove the steering wheel for replacement, as well as when removing the steering column and steering column switches
Set the steering wheel to the position corresponding to the rectilinear movement of the car
Remove the door trim to access the internal parts of the door
We prepare the car and disconnect the negative battery terminal
We remove the window lifter for replacement, as well as for repair
We prepare the car and raise the glass to the upper position
In the article, we will consider replacing the pads, caliper and disc of the rear wheels of a car
Replacing rear wheel pads
We prepare the car and remove the rear wheel from the side of the work performed
In the article, we will consider how to disassemble the cylinder head, grind the valves and assemble the head
Preparing the car for the task
In the article, we will consider the disassembly and assembly of the generator, as well as the replacement of generator parts
We remove the generator from the car, as described in the previous article
Adjusting the parking brake, replacing the cables and the parking brake lever
To complete the task, we install the car on a viewing ditch or lift
It is necessary to check the oil level in the gearbox after 15,000 km of the car's run, and after 75,000 km of run it is necessary to change the oil