We replace the belt after 60 thousand kilometers of the car or four years of the calendar life.

  1. Checking and replacing the timing belt of the Renault Duster car

The front wheel bearing is replaced when worn. A sign of bearing wear is the appearance of noise and knocking when the car is moving (noise turning into a whistle).

We remove the pan during the overhaul of the engine, as well as in the event of a leak through the seal of the pan

We prepare the car and drain the brake fluid from the system

Running in the car When running in a new car, the following rules must be observed: During the first 1000 km, you must not exceed a speed of 130 km/h in top gear

Remove Remove the accessory drive belt. Remove the crankshaft pulley.

Checking the technical condition of the timing belt drive Remove the top cover. Check the timing belt (A) for damage, as well as oil or coolant ingress.

Apply marks to all tappets, valves and springs corresponding to their location in the cylinder head so that their original location is not changed during assembly

We remove the sensors and the electronic engine control unit for replacement, as well as for repairs.

Removing the anti-roll bar for repair and replacement