Duster
We replace hydraulic drive parts in case of malfunctions.
Remove the rear gearbox for repair or replacement.
We remove the power plant supports when dismantling the power plant components, as well as when replacing the supports themselves.
We replace the pump in case of noise from its bearing or in case of tight rotation of the pump pulley, large radial play of the pump shaft
The filter element is replaced after 15 thousand kilometers of the car
On a vehicle with a 1.6L engine, the fuel filter is installed in the fuel module
We remove the engine camshafts when repairing the cylinder head, for replacement as a result of wear, as well as when replacing levers, oil caps and hydraulic bearings of valve levers
The camshafts of the F4R and K4M engines are located on top of the cylinder head.
One shaft opens the intake valves and the other the exhaust valves
If traces of oil leakage through the crankshaft seals are found, then first you need to check if the crankcase ventilation system is clogged and if the hoses of this system are pinched
Check the level in an automatic transmission every 15,000 km of the car
Remove the fuel tank for flushing or replacement
Preparing the car for the task. It is desirable that the tank is empty.
