Transmission

This section discusses vehicle transmission components: gearboxes, reduction gears.

Features, disassembly, and assembly of transmission components.

The main gear pinion is made integral with the shaft (tailpiece) and is installed in the gearbox neck on two tapered bearings.

The outer bearing rings are pressed into the neck seats, and the inner ones are put on the tailpiece

  1. Disassembly and assembly of the VAZ-2107 gearbox
  2. Design features of the VAZ-2123 gearbox
  3. Features of the transfer case VAZ-2123
  4. Removal and disassembly of the gear selection mechanism of the VAZ-2123 gearbox
  5. Repair of a five-speed gearbox VAZ-2107
  6. Fault detection and assembly technology of the VAZ-2123 gearbox
  7. Design features of the VAZ-2107 checkpoint
  8. Fault detection and assembly of the rear gearbox VAZ-2123
  9. Disassembly and assembly of the UAZ-3151 gearbox
  10. Disassembly and assembly of the VAZ-2123 gearbox
  11. Dismantling the transfer case VAZ-2123