UAZ car

These two-axle, all-terrain vehicles, with front and rear drive axles (4x4 wheel arrangement), are designed to transport people and cargo on all types of roads and off-road. Vehicles equipped with a towing hitch and shock-absorbing device can tow a single-axle trailer with a gross weight of up to 850 kg. Vehicles with a rigid towing device may only be used as a towing vehicle for short periods.

UAZ vehicles are equipped with two types of rear axles - with a single final drive or with additional wheel reduction gears

  1. Removing the rocker arm axis and replacing the oil-reflecting caps of the UAZ-3151, -31512, -31514, -31519 engine
  2. How to remove switches and switches of the UAZ-3151, -31512, -31514, -31519 car
  3. How to remove and deliver the transfer case of the car UAZ-3151, -31512, -31514, -31519

Articles

Disassembling the gearbox to replace parts Before disassembling the gearbox, wash it and install it on a rack

The car is equipped with a dry, single-disc, permanently engaged clutch with a hydraulically actuated release mechanism

We replace the car's rear suspension components if any defects are discovered during a technical inspection. Replacing the rear hub bearing. We replace the rear hub bearing if any play is detected...

We prepare the car and drain the brake fluid, as indicated in previous articles Remove the brake pads Remove the brake hose, for this

The throttle actuator cable and pedal are replaced in the event of a breakage or for repair.

We remove the engine flywheel to repair the engine, as well as to replace the crankshaft rear oil seal and to grind the surface of the flywheel, to replace the ring gear