UAZ car

We check and adjust the valve clearances when repairing the cylinder head, as well as when a characteristic engine knock appears in the upper part of the cylinder head

We prepare the car for the task and install it on a lift or a viewing ditch

Remove the gearbox

Preparing the car for the task

We unscrew the nuts securing the main brake cylinder to the vacuum booster and move the cylinder forward, trying not to bend the brake pipes too much

We prepare the car and remove the axle shaft with a hinge, as indicated in the previous article

Remove the steering knuckle from the car

In the article, we will consider the replacement of shock absorbers and front suspension springs

We prepare the car and install it on a lift or a viewing ditch

Cuffs of the front axle elements are replaced when worn and during repairs

The car has two interchangeable round headlights FG150-G1. Headlight housing - steel

Remove the starter as described in the previous article

In the article, we will consider disassembling the cardan shaft and replacing the crosspieces

We install the car on a viewing ditch or lift and remove the driveline, as described in the previous article

Depending on the engine model, various modifications of the K-151 carburetor are used, differing in the flow sections of the jets and minor design changes

We remove the steering knuckle and axle shaft for repair, as well as for replacement

Page 8 of 9