UAZ car

These two-axle, all-terrain vehicles, with front and rear drive axles (4x4 wheel arrangement), are designed to transport people and cargo on all types of roads and off-road. Vehicles equipped with a towing hitch and shock-absorbing device can tow a single-axle trailer with a gross weight of up to 850 kg. Vehicles with a rigid towing device may only be used as a towing vehicle for short periods.

The frame consists of two box-shaped spars of variable section, interconnected by five crossbars

  1. Removal of fuel system elements UAZ-3151, -31512, -31514, -31519
  2. Replacement of elements of the exhaust gas system UAZ-3151, -31512, -31514, -31519
  3. How to disassemble and assemble the transfer case of a UAZ-3151, -31512, -31514, -31519 car

Articles

After removing the engine from the car, install it on the stand.

We prepare the car and remove the axle shaft with a hinge, as indicated in the previous article Remove the steering knuckle from the car

In the article, we will look at how to bleed the refrigerant from the system, replace the tube seal rings and parts, and replace the cabin air filter element

The car has two brake systems, working and parking. Service brake system with hydraulic drive, and parking system with cable

Removal of the wiper and repair are carried out if the wiper motor or the wiper linkage fails.

The main dimensions of the crankshaft are given in Figure 1. Crankshaft - cast, cast iron, five-bearing. It is possible to regrind the crankshaft journals during repairs with a diameter reduction of...