The crankcase ventilation system ensures the removal of crankcase gases.

Blow-by gases through the exhaust hose enter the oil separator located on the cylinder block

Synchronization of the impulse wheels of the crankshaft and the drive gear shaft of the injection pump

The need to install (reinstall) the impulse wheels of the crankshaft and the shaft of the injection pump drive gearbox for their synchronization may be caused by the rearrangement of the injection pump drive gearbox during the current diesel engine repair

The engine oil pump is a conventional gear pump.

Disassembling the engine for overhaul.

Usually, an overhaul of the engine is required with a large motor resource, with a decrease in oil pressure and a decrease in compression in the engine cylinders

  1. Schemes COURT FOTON AUMARK ISF3.8 CM2220
  2. Replacement and inspection of the camshaft sensor VAZ-2123
  3. Lubrication system of the engine D-245.7E3 / D-245.9E3
  4. Removal and installation of the intake manifold of the K4M engine
  5. Installation of pistons and rings Diesel 740 KAMAZ
  6. Replacement of DMRV VAZ-2123 with electronically controlled throttle valve for EURO-5
  7. Adjustment of clearances in the valve drive ZMZ-402
  8. How to remove the receiver and intake manifold of the VAZ-2112 engine
  9. Diesel power system D-245.7E3 / D-245.9E3
  10. Replacing the timing belt on the VAZ-2112 engine
  11. Disassembly of the cylinder block of the K4M engine
  12. Removing elements of the Cummins ISF3.8 air intake system
  13. Feature of the crank mechanism of the KAMAZ-740.50-360, KAMAZ-740.51-320 engines
  14. Dismantling and troubleshooting of the crankshaft ZMZ-402
  15. Features of the ECM with an electronic gas pedal VAZ-2123

Page 7 of 30