UAZ car

These two-axle, all-terrain vehicles, with front and rear drive axles (4x4 wheel arrangement), are designed to transport people and cargo on all types of roads and off-road. Vehicles equipped with a towing hitch and shock-absorbing device can tow a single-axle trailer with a gross weight of up to 850 kg. Vehicles with a rigid towing device may only be used as a towing vehicle for short periods.

The windshield wiper consists of a gearmotor with rods, levers and brushes

The wiper mechanism is located under the instrument panel

  1. How to repair the front suspension of a UAZ-3151, -31512, -31514, -31519 car
  2. How to replace the spark plugs and set the ignition timing of UAZ-3151, -31512, -31514, -31519
  3. How to replace and adjust the rear wheel pads UAZ-3151, -31512, -31514, -31519

Articles

Checking and setting the TDC of the first engine cylinder in the compression stroke is necessary when performing work on removing the camshaft drive chain

General structure of the crankcase ventilation system The location of the elements of the crankcase ventilation system (K4J engine) is shown in Fig. 1.

In the article, we will consider the removal of the reservoir and the master cylinder of the car's brakes Remove the tank for flushing or replacement Disconnect the negative battery terminal

Switches and switches are removed for replacement and testing.

Place the vehicle on a two-post lift Make sure the color coding of the vehicle's springs and shock absorbers is identical to the color coding of the spare parts

We install the car on a viewing ditch. We install shoes under the rear wheels. Remove the decorative cap and loosen the wheel nuts.