We remove the elements of the oil system for replacement, as well as for repair

We prepare the car for the task and install it on a viewing ditch or lift

Adjustment of the wheel bearings is required after replacing the bearings and when the play increases

We prepare the car and hang the front wheel from the side of the work being done

Usually, the manifold is removed to replace the gaskets, as well as when repairing the cylinder head and engine

Two types of front axles are installed on cars - with a single final drive or with additional wheel reduction gears

In the article, we will consider the adjustment and repair work of the mechanism and drive of the car handbrake

The parking brake is adjustable if the lever travel has become more than half of its maximum travel (7-8 clicks), or the car is not held on a slope

Preparing the car for the task

We unscrew the nuts securing the main brake cylinder to the vacuum booster and move the cylinder forward, trying not to bend the brake pipes too much