engines

The engine of a car is the engine that drives a car.

This section describes the design, maintenance, and repair of engines.

Some engines and their features are described directly in the sections that describe this vehicle.

Note. Checking and adjusting valve clearances is performed on a cold engine (at a coolant temperature of 20°C) with the cylinder head installed.

The 2.0- and 2.4-liter gasoline engines are inline-four-cylinder units with dual overhead camshafts (DOHC). The cylinder head is equipped with a continuously variable valve timing (CVVT) system on the intake manifold.

We install the cylinder block on the stand for disassembly and assembly of units

  1. Repair of ShPG engine VAZ-2123
  2. Fault detection of the cylinder block of the K4M engine
  3. Dismantling, checking the connecting rod and piston group of the K4M engine

Control mode fuel consumption by the standard approved method. This method is used by all manufacturers and allows you to compare cars with each other.

During operation, tar deposits from crankcase gases accumulate in the crankcase ventilation system

According to the manufacturer's recommendation, the brake fluid should be replaced after 6 years of operation or after 90 thousand kilometers (whichever comes first)