We install the engine on a stand for disassembly and assembly of units
Unscrew the oil drain plug and drain the oil from the crankcase
In the article, we will consider the operations for disassembling and repairing the engine cylinder head
The valve timing mechanism serves to ensure the intake of fresh air charge into the cylinders and the exhaust of exhaust gases from them
The clearance between the oil scraper ring and the groove on the piston must be between 0.135 and 0.335 mm.
- Troubleshooting of engine parts VAZ-2123
- How to remove the fuel rail and the VAZ-2112 engine regulator
- Lapping the valves and replacing the valve stem seals of the cylinder head of the 740 Kamaz diesel engine
- How to remove and install the throttle assembly with electric drive VAZ-2123
- Tightening torques for fasteners of diesel engine KAMAZ 740.11-240, 740.13-260, 740.14-300, 740.30-260, 740.50-360, 740.51-320
- Preparation of parts for the assembly of the H4M engine
- Cleaning the crankcase ventilation system of the K4M engine
- Diesel engine K9K
- Checking the elements of the ISF3.8 charging system
- How to remove and install the VAZ-2123 air filter
- Appointment and replacement of the ECM controller with an electronic gas pedal VAZ-2123
- Repair of the coolant pump ZMZ-402
- Assembling the VAZ-2112 engine - continued
- Laying the crankshaft and the piston group in the cylinder block of the KamAZ engine
- Assembling the H4M engine