We remove the fuel rail to replace and check the operation of the injectors and when performing troubleshooting work related to the operation of the fuel system.
If the valve does not fit tightly on the seat, then gaps are formed in some areas of the valve and seat.
In this case, gases under pressure and at high speed pass into the formed gaps, so in this place the chamfers are subject to severe corrosion and the valve fits worse on the seat.
The throttle assembly with an electric drive of the multiport fuel injection system is mounted on the receiver.
- Tightening torques for fasteners of diesel engine KAMAZ 740.11-240, 740.13-260, 740.14-300, 740.30-260, 740.50-360, 740.51-320
- Preparation of parts for the assembly of the H4M engine
- Cleaning the crankcase ventilation system of the K4M engine
- Diesel engine K9K
- Checking the elements of the ISF3.8 charging system
- How to remove and install the VAZ-2123 air filter
- Appointment and replacement of the ECM controller with an electronic gas pedal VAZ-2123