Renault Sandero

This section describes the design, maintenance, and repair of the Sandero. The car is equipped with a K4M, K7J, and K7M gasoline engine. Removal, installation, disassembly, and assembly of various vehicle components and mechanisms are covered.

Remove the fuel rail and injectors for inspection and replacement.

  1. Replacing parts and assemblies of the front suspension Renault Sandero
  2. Removal and repair of the Renault Sandero generator
  3. How to replace the camshaft seal of the Renault Sandero engine

Articles

The CV joints are replaced when they are worn out. You can determine the wear by a characteristic knock in the front of the car when cornering

General structure and operating principle of the thermostat The thermostat in the engine cooling system serves for the rapid warming up of the engine to operating temperature.

The steering of the car is rack and pinion, with hydraulic booster. Steering rack-and-pinion

We replace the shock absorber and spring of the rear suspension in case of deformation or breakage

When replacing the brake drum, you need to consider: - the brake drums must be the same diameter on both sides; - when grinding one of the drums, you need to grind the other drum;

We replace hoses and tubes in case of defects, as well as after the expiration of the calendar and operational life (applies to hoses).