UAZ car

These two-axle, all-terrain vehicles, with front and rear drive axles (4x4 wheel arrangement), are designed to transport people and cargo on all types of roads and off-road. Vehicles equipped with a towing hitch and shock-absorbing device can tow a single-axle trailer with a gross weight of up to 850 kg. Vehicles with a rigid towing device may only be used as a towing vehicle for short periods.

We prepare the car and remove the rear wheel from the side of the task being performed

Remove the brake pads from the brake shield and leave them hanging on the support pins

  1. The structure of the frame and body of the car UAZ-3151, -31512, -31514, -31519
  2. Replacement of the main and working cylinder of the clutch UAZ-3151, -31512, -31514, -31519
  3. Design feature of the rear axle of the UAZ-3151, -31512, -31514, -31519

Articles

We remove the steering knuckle and axle shaft for repair, as well as for replacement

The air supply system of engines with a selective catalytic converter system consists of the following components:

We replace the gasket under the cylinder head during engine repair or when gas or coolant leaks through the gasket.

The hoses and pipes of the vehicle's brake system must be replaced after 7 years of operation or after 100,000 km of run

Place the vehicle on a two-post lift. Remove the upper engine covers.

Preparing the car for the task. Disconnect the negative terminal of the battery.